VS2：沖擊和振動開關（20700042）
VS2 (20700042) : Shock & Vibration Switch

VS2 系列開關是用于關閉發動機或電動機供電設備的沖擊敏感機構。這些可調磁沖擊開關具有廣泛的范圍，并使用磁性閂鎖以確保可靠運行。

VS2 非常適合用于發動機、泵、壓縮機、熱交換器和泵組 - 可用于任何需要停機保護的地方，以防止破壞性沖擊/振動。開關可根據每種應用所需的靈敏度進行現場調節。我們可以為 VS2 提供合格證書。

MURPHY VS2：沖擊和振動開關（20700042）
VS2 (20700042) : Shock & Vibration Switch

基本操作
按下復位按鈕可將脫扣閂鎖移動到磁性保持位置。沖擊/振動將使磁鐵超過此保持位置，釋放彈簧加載的脫扣閂鎖以轉移觸點并關閉機器（參見尺寸圖或零件的視覺表示）。

文獻：
銷售公告
安裝說明

VS2 (20700042) : Shock & Vibration Switch

VS2: Shock & Vibration Switch (20700042)

The VS2 Series switches are shock sensitive mechanisms for shutdown of engine or electric motor powered equipment. These adjustable magnetic shock switches have a wide range and use a magnetic latch to ensure reliable operation.
Ideal for use on engines, pumps, compressors, heat exchangers and pumping units - the VS2 can be used anywhere shutdown protection from damaging shock/vibration is desired. Switches are field adjustable to sensitivity required in each application. Wecan provide a certificate of conformance for the VS2.

Basic Operation
Pushing the reset button moves the tripping latch into a magnetically held position. A shock/vibration will move the magnet beyond this holding position, freeing the spring loaded tripping latch to transfer the contacts and shut down the machinery (see dimensional diagrams or visual representation of parts.)

Literature:
Sales Bulletin
Installation Instructions

VS2 Series switches are shock-sensitive mechanisms for shutdown of engine or electric motor powered equipment. It is designed to detect shock/vibration in three planes of motion.

These fully adjustable switches use a magnetic latch to ensure reliable operation. Explosion-proof EX models for hazardous locations are available.

Ideal for use on engines, pumps, compressors, heat exchangers and pumping units, the VS2 Series can be used where shut-down protection from damaging shock/vibration is desired. Switches are field adjustable to the sensitivity required in each application.

Basic Operation
Pushing the reset button moves the tripping latch into a magnetically held position. A shock/vibration will move the magnet beyond this holding position, thus freeing the spring loaded tripping latch to transfer the contacts and shut down the machinery (see dimensional diagrams or visual representation of parts).

Remote Reset Operation (VS2EXR and VS2EXRB)
The remote reset option includes a built-in electric solenoid which allows reset of tripped unit from a remote location. Available for 115 VAC or 24 VDC.

Specifications

Normal Operating Temperature: -40° to 185°F (-40° to 85°C); For UL and CSA applications, applicable temperature specification is de-rated to -40° to 140°F (-40° to 60°C)
VS2 and VS2C
Case: Environmental Protection: Ingress protected to IP54 (when mounted on a horizontal surface with drain holes down). Suitable for non-hazardous areas. VS2C: C-clamp mount, includes 45 ft. (13.7 m) 2-conductor cable and 5 cable clamps
Contacts: SPDT-double make leaf contacts, 3A @ 240 VAC; 10A @120 VAC; 10A @ 32 VDC
Shipping Weight: VS2: 2 lb. 8 oz. (1.1 kg); VS2C: 7 lb (3.2 kg)
Shipping Dimensions: VS2: 8-1/4 x 9-1/4 x 5 in. (210 x 235 x 127 mm); VS2C: 12 x 7 x 5-1/2 in. (305 x 178 x 140 mm)
VS2EX
Case: Base mount, explosion-proof aluminum alloy housing; meets IP54 specifications; Class I, Division 1, Groups C & D; UL and CSA listed
Certification: CSA, UL
Snap switches: 2-SPDT snap switches; 5A @ 480 VAC; 2A resistive, 1A inductive, up to 30 VDC
Shipping Weight: 4 lb. 8 oz. (2 kg)
Shipping Dimensions: 8-1/4 x 9-1/4 x 5 in. (210 x 235 x 127 mm)
VS2EXR
Case: Same as VS2EX
Certification: CSA, UL
Snap switch: 1-SPDT snap switch and reset coil; 5A @ 480 VAC; 2A resistive, 1A inductive, up to 30 VDC
Remote Reset: 115 VAC or 24 VDC (specify)
Shipping Weight: 5 lb. 8 oz. (2.2 kg)
Shipping Dimensions: 8-1/4 x 9-1/4 x 5 in. (210 x 235 x 127 mm)
VS2EXRB
Case: Explosion-proof aluminum alloy housing; designed to meet Class I, Division 1, Group B hazardous areas
Certification: No third-party certification
Snap switch: 1-SPDT snap switch with reset coil (option available for 2-SPDT switches); 5A @ 480 VAC; 2A resistive, 1A inductive, up to 30 VDC
Remote Reset: 115 VAC or 24 VDC (specify)
Shipping Weight: 17 lb. 8 oz. (7.9 kg)
Shipping Dimensions: 12 x 12 x 10 in. (305 x 305 x 254 mm)